Main Article Content



Experimental and numerical studies of solidification phenomena have continued to complement each other in the quest for advanced knowledge during component manufacture. The dynamics of engineering designs coupled with the desire for lightweight and improved materials have sustained the progress achieved in recent decades on the modelling of casting systems. The current study presents the simulation of solidification conditions for different aluminium-based eutectic binary alloys and validation with an experimental investigation. The effect of mould material was analysed for the solidification of Al-4.5% Cu using metallic, sand, quartz and Plaster of Paris (POP) moulds respectively. Simulation of the eutectic alloys was carried out using micro-macro model previously developed by the current authors. The effect of mould size and transient evolution of structure during solidification in static casting process were successfully simulated. The results of the experimental investigation showed that although the cooling curves for the different mould materials are qualitatively similar, they respond differently to the presence of the liquid metal leading to significantly different rates of latent heat evolution. The simulated cooling curves for the four eutectic alloys solidified inside sand mould showed that Al-4.5% Cu and Al-3.0% Si have the fastest transformations while Al-6.0% Mg and Al-3.0% Zn have the slowest rate of cooling. Mould size has significant influence on thermal distribution during solidification as temperature tends to reach steady-state and homogenize faster in smaller moulds than bigger ones. For all the alloys compared, nucleation period is very small relative to the total solidification time. The results showed that transient evolution of volumetric grain density and grain radius varied significantly.

Simulation, micro-macro modelling, solidification, eutectic binary alloys, experimental validation.

Article Details

How to Cite
MGBEMERE, H. E., EGOLE, C. P., SOBAMOWO, G. M., & LAWAL, G. I. (2021). MICRO-MACRO MODELLING OF SOLIDIFICATION WITH EXPERIMENTAL VALIDATION IN SELECTED EUTECTIC BINARY ALUMINIUM ALLOYS. Journal of Applied Physical Science International, 13(1), 1-12. Retrieved from http://ikpresse.com/index.php/JAPSI/article/view/6002
Original Research Article


Kanaujiya K, Tiwari YM. Experimental investigation on solidification rate and grain size for centrifugal casting. International Journal of Science and Engineering Research. 2015;6(9):1336-1341.

Fan Z, Liu G. Solidification Behaviour of AZ91D Alloy Under Intensive Forced Convection in the RDC Process. Acta Materialia. 2005;53:4345-4357.

Ma X, Li Y, Yang Y. Grain refinement effect of pulsed magnetic field on solidification microstructure of superalloy IN718. Journal of Material Research. 2009;24(10): 3174-3182.

Timmel K, Eckert C, Gerbeth G. Experimental investigation of the effect of the flow in a continuous casting mould under the influence of a transverse direct current magnetic field. Metallurgical and Materials Transactions B. 2011;42B:68-80.

Wang X, Zhang H, Zuo Y, Zhao Z, Zhu Q, Cui J. Experimental investigation of heat transport and solidification during low frequency electromagnetic hot-top casting of 6063 aluminium alloy. Materials Science and Engineering A. 2008;497:416-420.

Zhang H, Charmchi M, Veilleux D, Faghari M. Numerical and Experimental Investigation of melting in the Presence of a Magnetic Field: simulation of low-gravity environment. Transaction of the ASME. 2007;568-576.

Nowak M, Bolzoni L, Hari N. Babu grain refinement of al-si aalloys by nb-b inoculation part i: concept development and effect on binary alloys. Materials and Design. 2015; 66:366-375.

Kaygisiz Y, Marash N. Hardness and electrical resistivity of Al-13wt%Mg2Si Pseudoeutectic Alloy. Russian Journal of Non-Ferrous Metals. 2017;58(1):15-21.

Hajkowski J, Ignaszak Z. Experimental and simulation tests on the impact of the conditions of casting solidification from alsi9cu3 alloy on their structure and mechanical properties. Archives of Foundry Engineering. 2018;18(1): 167-175.

Hamilton RW, See D, Bulter S, Lee PD. Multiscale modelling for the prediction of casting defects in investment cast aluminium alloys. Materials Science and Engineering A. 2003;343:290-300.

Kanetkar CS, Chen I, Stefanescu DM, El-Kaddah N. A latent heat method for macro-micro modelling of eutectic solidification. Transactions ISIJ. 1988;28:860-868.

Long-Sun C, Wu-Chang D. Macro-micro modeling of solidification. Proc. Natl. Sci. Counc. ROC. (A). 1999;23(5):622-629.

Stefanescu DM, Upadhya G, Bandyopadhyay D. Heat transfer-solidification kinetics modelling of solidification of castings. Metall. Trans. A. 1990;21A:997-1005.

Egole CP, Mgbemere HE, Sabomowo GM, Lawal GI. Micro-macro modelling of thermal evolution and microstructure prediction during solidification in static casting processes for binary equiaxed eutectic alloys. Article in Press; 2021.

Egole CP, Mgbemere HE, Sabomowo GM, Lawal GI. Evaluation of the effect of cooling conditions and Heat Transfer Coefficients on Solidification of Al-Cu Binary Alloy in Static Casting Process. Advanced Materials Research. 2020;1158:1-16.

Goulart PR, Cruz KS, Spinelli JE, Ferreira IL, Cheung N, Garcia A. Cellular growth during transient directional solidification of hypoeutectic al-fe alloy. Journal of Alloys and Compounds. 2009;470:589-599.

Bertelli F, Brito C, Meza ES, Cheung N, Garcia A. Inward and outward solidification of cylindrical castings: the role of metal/mould heat transfer coefficient. Materials Chemistry and Physics. 2012;136:545-554.

Kurz W, Fisher DJ. Fundamentals of solidification, third edition, Switzerland, Trans Tech PublicationsI; 1992.

Rios CT, Milenkovic S, Ferrandini PL, Caram R. Directional solidification, microstructure and properties of the Al3Nb-Nb2Al Eutectic. Journal of Crystal Growth. 2005;275: 153-158.

Patankar SV, Spalding DB. A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows. International Journal of Heat and Mass Transfer. 1972a;15:1787.

Celik IB, Ghia U, Roache PJ, Freitas CJ, Coleman H, Raad PE. Procedure for estimation and reporting uncertainty due to Discretization in CFD applications. J. Fluids Eng. 2008;130:1-4.